Tools > Precision Gauges & Accessories

MPN: FG9

MPN: 63676 Set of 4 Pairs - Models TBD752, TBD751, TBD753 and TBB490 - In Case Starrett® No. 384 Steel Parallels are hardened and ground to close l...

MPN: 7033-10 Comes with a mechanical locking system and allows fine adjustment You can also fix a dial indicator in any position by mechanically cl...

MPN: 53294 WITH PLAIN BEARINGS Ranges up to 1" and 25 mm ; These indicators have a shockless, hardened steel gear train and jewel bearings, except ...

MPN: 67447 With Locking Device Threads per Inch (TPI) 3 1/2, 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15,6, 18, 20, 22, 24,26, 2...

MPN: 52484 With Locking Device and 11 1/2 and 27 Pipe Thread Pitches Threads per Inch (TPI) First Corner 17 Leaves: 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9,...

MPN: 269MAThese gauges are for determining hole sizes in dies and all kinds of other work. They read in thousandths of an inch or 0.02 mm. Made of ...

MPN: 50718 A to Z Letter Size Drill Gauge A-Z RANGE Specifications EDP No. 50718

MPN: 50678 English Standard Wire Gauge NOS. 1-36 (.300-.004") RANGE Specifications EDP No. 50678

MPN: FG30

MPN: FG2

MPN: FG15A

MPN: FG1

MPN: 21Decimal equivalents of sizes are stamped on backSpecifications Display Type Analogue Measuring Range 0.3125"-0.0078125" Material Tempered St...

MPN: 20Decimal equivalents of sizes are stamped on backSpecifications Material Tempered Steel Finish Satin Measuring Range 0 - 36 Diameter 3-1/4" T...

MPN: 16MESpecifications Readings Analogue Material Stainless Steel Graduations 1/64" (1 mm) Length 4"

MPN: 15Hole sizes and decimal equivalents are permanently marked on faceSpecifications Dimensions 6-1/2" x 2-1/2" Material Heat-Treated Steel

MPN: 230 Each leaf is etched with a size number measured in thousandths of an inch, as well as its millimeter equivalent Knurled lock nut holds lea...

MPN: 24 For 1/16" to 1/2" fractional size bits Made of heat-treated heavy gauge steel, machined and ground to close tolerances Etched graduations a...

MPN: 827A Tool steel hardened, ground, and lapped to close tolerances for diameter and concentricity Includes protective case Specifications Contac...

MPN: H3105 Go / No Go style gauges for quick measurements 2 step grinding in .002" increments allows quick measurements of very specific ranges Sta...

MPN: 50035 With Locking Device and 11 1/2 and 27 Pipe Thread Pitches Threads per Inch (TPI) 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13,...

MPN: 53063 Double End Work surfaces may be located easily, quickly and accurately with these edge finders Body and contacts are made of tool steel ...

MPN: 52617 Set of 6, Models HV072, HV073, HV074, HV075, HV076, HV077 in case SETS SELF-CENTERING WITH TWO TELESCOPING ARMS; 5/16-6" (8-150 mm); Han...

MPN: 51318U.S. Standard GaugeSpecifications Display Type Analogue Measuring Range 0.3125" - 0.007" EDP No. 51318

MPN: 51292 Taper Gauge For bearing work and for gaging slots Made of quality tool steel; HU391 Taper Gauge: Top view is front side with inch measur...

MPN: 50677 1/16-1/2" RANGE Jobbers' Drill Gauge Specifications EDP No. 50677

MPN: 50649 (Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013,.014, 0.015,...

MPN: 50589 With Locking Device Pitches in Millimeters 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80,0.85, 0.90, 1, 1.10,1....

MPN: 50588 With Locking Device and 60° Centre Gauge Threads per Inch (TPI) 2 1/4, 2 3/8, 2 1/2, 2 5/8, 2 3/4, 2 7/8, 3, 3 1/4, 3 1/2, 4, 4 1/2, 5, ...

MPN: 50315 (Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013,.014, 0.015,...

MPN: 55974 (Range) Leaf Thickness": 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70,0.75, 0.80, 0.85, 0.90, 0.95...

MPN: 66B (Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015,...

MPN: 50314 (Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.01...

MPN: 52841 INCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimet...

MPN: 161D Gauge measures clearances from .0015" to .035" and .038mm to .889mm Blades have both SAE and metric measurements Also includes one .010" ...

MPN: 53072 Hardened-ball measuring surface with two-point contact Radius on each gauge is less than the minimum diameter to be measured For general...

MPN: 2416A Standard dial indicator with a 0.375" diameter stem, a #4-48 UNF contact point thread mount Units displayed in fractional inches, and ha...